Advanced GE Logiq E10

Agenda – Introduction to Diagnostic Ultrasound

1. Introduction and overview
   
   1. Introduction, clinical features and options
   2. Physical design of console
   3. Design features
      1. User interface
      2. External inputs and outputs
      3. External drives and optional equipment
      4. Printers and VCRs
      5. Probes
      6. DICOM & connectivity
   4. Service access
      1. Service licenses
   5. Basic Use of Logiq E10
      1. Control panel layout
      2. Touch screen menus
      3. Monitor display layout
      4. Power on, power off
      5. Operator panel movement
      6. Monitor adjustments
      7. Wheel locks
      8. Patient browser
         1. Creating a patient study
2. Functional design & theory of operation
   
   1. Theory of operation and components
      1. Front End
         1. Components and functions
         2. Front End signal flow and buses
         3. Location of PCBs
         4. LEDs for troubleshooting
         5. Design changes
      2. Student Lab, Front End board removal and replacement
      3. Back End
         1. Components and functions
         2. Location of parts
         3. Inputs and outputs
         4. LEDs for troubleshooting
         5. Design history and versions
      4. Student Lab, access to back end components
         1. Remove and replace GPU
      5. Power subsystem
         1. Assemblies
         2. Location of parts
      6. Student Lab, Remove and replace main power supply
      7. Timing and control
         1. Components
      8. User interface
         1. XY and Z mechanisms
         2. Operator panel
      9. Student Lab, remove and replace Trackball Assembly
   2. Software Theory & Design
      1. Design changes, software configurations
      2. DICOM & connectivity
      3. Service configuration
      4. Typical Boot Sequence
      5. Installing software
3. Diagnostics and servicing
   
   1. Collecting vital system information
   2. Tools Needed
   3. Mechanical adjustments
      1. Monitor range of motion
      2. Adjusting the XY & Z mechanisms
   4. Service desktop
      1. Service licenses and SSA Key
      2. System Information
      3. Software status
      4. Hardware configuration
      5. Hardware status and monitoring
      6. Network tools
      7. Hardware diagnostics
      8. Utilities
         1. Logs
         2. Hard drive tools
         3. Database tools
   5. Student Labs, Logiq E10 diagnostics & utilities
   6. Troubleshooting
      1. Simulator mode
      2. Image artifacts
      3. No boot
4. Preventive Maintenance
   
   1. User maintenance
      1. Tasks and frequencies
   2. Service PMs & quality assurance testing
      1. Inspections
      2. Functional checks
      3. Electrical safety tests
5. Final Test

Course Prerequisite  

Knowledge of basic ultrasound theory and principles gained through training and/or experience.